Accessories
| Number of Channels |
RF Channels - 18 |
| Polar Pattern |
Microphone Omnidirectional |
| Signal Processing |
High-Pass Filter:
75 Hz
High-Pass Filter:
150 Hz |
| Input/Output |
Receiver Audio 2 x 1/8" / 3.5 mm TRS Female Balanced/Unbalanced Mic/Line Output (Lockable)
Transmitter1 Audio 1 x 1/8" / 3.5 mm TRS Female Balanced/Unbalanced Input (Lockable)
Transmitter2 Audtio 1 x XLR 3-Pin Female Balanced Input (Lockable); 1 x 1/8" / 3.5 mm TRS Female Unbalanced Input (Lockable); 1 x 1/8" / 3.5 mm TRS Female Unbalanced Output
Microphone Output 1 x 1/8" / 3.5 mm TRS Male Unbalanced (Lockable)
|
General
| Warranty |
1 Month Warranty |
This Deity Connect Interview kit is specialized for shooters who need a flawless interview setup. With 1 HD-TX, 1 body pack transmitter, 1 dual-channel receive, 2 lavs, and all the cables and accessories you’ll need, a wireless boom is now in your arsenal. Flexible and effective, this will make your next interview or narrative shoot far less complicated.
System Features
2.4 GHz ecosystem with proprietary advancements for strong audio linkup while coexisting with other devices in the same frequency band
Bidirectional transceiver system is constantly scanning and mapping out the 2.4 GHz band, coordinating and planning the next 70 frequency hops to avoid RF interference
"Listen-Before-Talk" mechanism detects RF interruption then adds missing audio and data into the stream without increasing system latency
Dual true diversity design—as found in commercial-grade Wi-Fi and high-end drones—ensures reliable signal delivery
Encrypted 24-bit / 48 kHz signal transmission
Easy pairing and configuration
Powered via internal lithium batteries for up to 10 hours at 100mW RF output power
Recharges via USB Type-C connections in about an hour
Up to 500 battery cycles
19 ms latency
DUO-RX Receiver
Dual true diversity antenna arrays for a quad-antenna setup
Removable SMA elbow antennas allow user upgrades to clover antennas, directional antennas, or antenna splitters
Screen, buttons, and antennas face up in a sound bag, while USB Type-C and audio outputs are on the bottom for easy cable management
Lightweight at just 8.7 ounces
Daylight-bright, high-resolution OLED screen shows real-time VU metering, transmitter battery level, and more on the home screen
Convenient remote control of every audio adjustment on each transmitter
Easy firmware updates
Two locking 3.5mm outputs with multiple output modes
1/4" and 3/8" mounting points
BP-TX Transmitter
Compact, durable brushed-aluminum housing
SMA antenna connector
1/4"-20 mounting point for the belt clip
Two multicolor LED alert lights
Daylight-bright, high-resolution OLED screen shows statuses of all major features and real-time VU metering on the home screen
Auto/manual RF power output adjustment from 10 to 100mW
Automatic RF power mode increases battery life by never using more power than the system needs
Latching mute switch
Guardrail limiter
75/150 Hz low-cut filters
7 to 20 kHz high-frequency boost in 1 dB steps
Assignable unique user ID
Screen and button lock
Accepts mic- or line-level signals
Selectable stereo line-level input mode
Transmits to one receiver
HD-TX Plug-On Transmitter
Transmits to a Deity Connect receiver or records to a microSD card (media card available separately)
Firmware V2.0 allows USB audio interface functionality and simultaneous transmission and recording when using the XLR input and 48V phantom power
2.4 GHz encrypted transmission with advanced frequency hopping and bidirectional linking
Selectable RF output power of 10 / 25 / 50 / 100mW, or automatic
Guardrail analog limiter
75/150 Hz low-cut filters
Adjustable high-frequency boost (7 to 20 kHz in +1 dB steps)
Records 24-bit / 48 kHz WAV files
Balanced 3-pin XLR input with 48V phantom power
Locking 3.5mm TRS mic/line input with 3V plug-in power
1.3" OLED display
Selectable screen and button lock (manual or automatic)
Up to 10 hours of battery life at 100mW RF power
Recharges via USB Type-C connection (charging cable included)
90-minute recharge time via USB QuickCharge 2.0 / 3.0
Approximately eight hours of recording time via an 8GB microSD card (available separately)
3.5mm headphone jack for real-time monitoring or listening to playback
Firmware updatable
