The P-424S Carbon Fiber Photo/Video Monopod from Sirui is a 4-section carbon fiber monopod with three fold-down support feet for additional stability. In addition, an adjustable friction control ball head mechanism in the base of the monopod and a panning hand grip enable smooth 360° pan and 20° tilt movements. The three support feet fold up and lock into position against the monopod and can even be removed entirely and used as a table-top tripod. A large rubber base foot is available for conventional use and it can be removed and replaced with the included spike foot for use on soft or slippery ground. It weighs just 3.1 lb but can support a load up to 26.5 lb.

The mounting plate on the P-424S comes with a reversible screw that accommodates 1/4"-20 and 3/8"-16 tripod sockets or compatible heads. The maximum height reaches 75" and it can fold down to 30", three twist locks provide quick and stable adjustment. With adjustable tension control, the base locking collar enables the monopod to stand upright on its own.

The Sirui VH-10 Fluid Video Head, pronounced Soo-Ray, the VH-10 is a precision-machined aluminum video head that supports up to 13.2 pounds. It features a fixed spring counterbalance that helps bring the head to a neutral position and variable tilt drag with 0 drag for fast tilt positioning; pan drag is preset and fixed. The pan and tilt locks allow you to set a shot, and lock off the head so it doesn't move, for lock-off shots.

The Manfrotto compatible sliding Quick Release (QR) plate helps to balance your camera, and the head comes with a safety lock for the QR plate. The head features 2 x bubble levels, and the VH-10 Video Head can be mounted to available ball adapters, tripods, and other camera supports, not included, via the 3/8" threaded female receiver on the flat base.

Precision machining and forged aircraft aluminum body provides a rugged, reliable head that weighs less than two pounds.

The fixed spring counterbalance works to return the fluid head to its neutral position.

Individual pan and tilt locks allow you to lock one axis without affecting the movement of the other.

The VH-10 head can be mounted on available flat base tripod legs. Available adapters, not included, allow you to mount the fluid head to tripods with a 75mm bowl.