CORPORATE inquiries and orders, email us: CORPORATE@HENRYSCAMERAPHOTO.COM
Download our official app

Sennheiser Shotgun Microphone MKE-600

Sennheiser
  • ₱21,690.00

  • 0% 3mos BDO, BPI, UNIONBANK, HSBC ₱7,230.00/mo.

Product Highlights
  • For Indie Films, TV & Documentaries
  • Selectable 100 Hz Low-Cut Filter
  • Resists Structure-Borne Noise
  • Low-Noise Circuitry, Mild Presence Boost
  • High Sensitivity Requires Less Gain
  • XLR to 3.5mm TRS Cable for Cameras
  • AA Battery or Phantom Powered
  • Windscreen Reduces Wind Noise
  • Lightweight and Rugged Metal Housing
Quantity

Accessories

Form Factor Stand/Boom Mount
Frequency Range 40 Hz to 20 kHz
Maximum SPL 132 dB SPL (Phantom Power); 126 dB SPL (Battery Power)
Polar Pattern Lobar / Supercardioid
Sensitivity 21 mV/Pa (Phantom Power); 19 mV/Pa (Battery Power)
Sound Field Mono
Output Connectors 1x XLR 3-Pin Male (on Mic), 1x 1/8" / 3.5 mm TRS Male (on Included Cable)

General

Weight Microphone: 28 g
Material Metal

Quality Sound
The 10" long MKE 600 uses an interference tube and a supercardioid/lobar polar pattern to provide pronounced directivity on-axis along with significant attenuation of sound entering at the sides and rear, making the MKE 600 far more effective at capturing distant sources than the omnidirectional mics found in most cameras.

Bass Roll-Off
The MKE 600 naturally reduces sub-bass frequencies below 40 Hz to prevent unnatural bass buildup. Activate the switchable low-cut filter at 100 Hz to roll off more low-frequency noise from common sources such as air conditioners and traffic.

Battery or Phantom Powered
Thanks to its 3-pin XLR output and compliance with 48 VDC phantom powering, the MKE 600 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters, as well as built-in preamps on many camcorders and cinema cameras.

When using devices that don't offer phantom power, the MKE 600 may optionally be powered for up to 150 hours by a single AA battery (available separately). Approximately 8 hours of operating time remain once the low-battery indicator lights up red. Use the on/off switch to prevent unnecessary battery drain.

Ideal for Camera, Tripod, or Boompole Mounting
The MKE 600 includes a shoe shockmount for easy placement on your camera or a tripod. To mount the MKE 600 on a boompole or mic stand, use the Rycote InVision INV-HG mkIII shockmount (available separately), which will also impede the transfer of vibrations between your boompole/stand and the mic.

XLR to 3.5mm TRS Adapter Cable for Cameras
Included with a MKE 600 is a short coiled adapter cable—XLR female to 3.5mm TRS male—that lets you connect the mic directly into a mini-jack mic input on a camera.

Windscreen Minimizes Wind Noise
The MKE 600 has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners by up to 25 dB. Enhanced attenuation of wind noise is possible with the addition of an optional windshield such as the Rycote 15cm Super-Softie, which also provides high immunity to rain.

For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider a complete windjammer, windshield, and shockmount suspension system such as the Rycote Super-Blimp NTG or the large Rycote Super-Shield Kit (both are sold separately).